Repair Procedures

REMOVAL AND INSTALLATION

1. Remove rear pillar trim.
(1) Remove pillar blanking cover and bolt.




(2) Remove trim from rear pillar.




2. Remove rear seat cushion.
(1) Release seat cushion stopper.




(2) Remove seat cushion.
3. Remove rear seatback.
(1) Remove bolts(4).

Tightening torque :
17 - 26 Nm (1.7 - 2.6 kg-m, 12 - 19 lb-ft)





(2) Remove seat belt from belt guide.
(3) Release seatback stopper, and then remove seatback.




4. Remove seat belt lower anchor bolt(LH/RH).

Tightening torque :
40 - 55 N.m (4.0 - 5.5 kg.m, 29 - 40 lb.ft)





5. Remove rear package tray trim.
(1) Remove fasteners(6).




(2) Remove trim from rear package tray.




(3) Remove seat belt guide and seat belt from trim.
6. Install in reverse order of removal.