Repair Procedures

REMOVAL AND INSTALLATION

1. Remove rear transverse trim.
(1) Remove fasteners(3).




(2) Remove rear transverse trim.




2. Remove rear seat cushion.
(1) Release seat cushion stopper.




(2) Remove seat cushion.
3. Remove rear seatback.
(1) Remove bolts(4).

Tightening torque :
17 - 26 Nm (1.7 - 2.6 kg-m, 12 - 19 lb-ft)





(2) Remove seat belt from belt guide.
(3) Release seatback stopper, and then remove seatback.




4. Remove luggage side trim.
(1) Remove trunk lid weatherstrip.
(2) Remove screws(3) and fasteners(9).




(3) Remove luggage side trim from trunk.
5. Install in reverse order of removal.
When installing trunk lid weatherstrip, the painting mark of weather strip and the "V"-shaped groove of body flange should meet.