Electrical Parts

Electrical parts

Battery cable
Before disconnecting connectors or replacing electrical parts, disconnect the negative battery cable.





Connectors(Removal of connector)
1. Never pull on the wiring harness when disconnecting connectors.




2. Connectors can be removed by pressing or pulling lock lever.





Connectors(Locking a connector)
Listen for a click when locking connectors. This sound indicates that they are securely locked.





Connectors(Inspection)
1. When a tester is used to check for continuity or to measure voltage, insert tester probe from wire harness side.




2. Check terminals of waterproof connectors from connector side because they cannot be accessed from harness side.

NOTE:
- Use a fine wire to prevent damage to the terminal.
- Do not damage the terminal when inserting the tester lead.





Terminals(Inspection)
Pull lightly on individual wires to ensure that they are secured in the terminal.