Repair Procedures
Removal and Installation
1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A) (ULEV only).
Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)
2. Remove the catalytic converter & center muffler assembly (B) after disconnecting the oxygen sensor connector (A) (ULEV only).
Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)
3. Remove the main muffler (A).
Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)
4. Installation is the reverse order of removal.
NOTE:
When installing, replace with new gaskets.