Repair Procedures

Replacement

Door Scuff Trim Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. Remove the door scuff trim (A).




2. Installation is the reverse of removal.

Front Pillar Trim Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. After loosening the mounting screw, then remove the front pillar trim (A).




2. Installation is the reverse of removal.

NOTE:
Replace any damage clips.

Center Pillar Trim Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. Remove the door scuff trim.
2. Remove the luggage side trim.
3. After loosening the mounting screw, then remove the center upper pillar trim (B).




4. Installation is the reverse of removal.

NOTE:
Replace any damage clips.

Rear Pillar Trim Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdrivers, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. Remove the door scuff trim.
2. Remove the luggage side trim.
3. After loosening the mounting screw, then remove the rear pillar trim (B).




4. Installation is the reverse of removal.

NOTE:
Replace any damage clips.

Package Tray Trim Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdrivers, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. Remove the rear seat assembly.
2. Remove the door scuff trim.
3. After loosening the mounting clips, then remove the luggage side trim (A).




4. After loosening the mounting screw, then remove the rear pillar trim (B).




5. After loosening the mounting clips, then remove the package tray trim (A).




6. Installation is the reverse of removal.

Trunk Trim Replacement

NOTE:
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and Panels.

1. Remove the trunk lid trim
2. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.