Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 2012 >> Forte L4-2.0L >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Wheel Hub >> Service and Repair >> Rear Hub - Axle >> Repair Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Repair Procedures





Replacement

1. Loosen the wheel nuts(B) slightly.
Raise the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire(A) from rear hub.





CAUTION:
Be careful not to damage to the hub bolts (B) when removing the rear wheel and tire (A).

3. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire as shown in the illustration.

Tightening torque:
49 - 59 N.m (5.0 - 6.0 Kgf.m, 36 - 43lb.ft)




4. Loosen the mount screw and then brake disc(A).




5. Remove the rear brake lining and parking brake cable(B). (refer to BR group-rear brake)




6. Disconnect the wheel speed sensor connector(A) and then remove the hub bearing(B).




7. Install in the reverse order of removal.

Inspection

1. Check the hub for cracks and the splines for wear.
2. Check the brake disc for scoring and damage.
3. Check the rear axle carrier for cracks.
4. Check the bearing for cracks or damage.
pro multis · About Operation CHARM