Repair Procedures

Replacement

Floor Console Replacement

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, disconnect the gear boots (A).




2. Using a screwdriver or remover, remove the console upper cover (A).




3. Disconnect the connectors (A).








4. Remove the parking brake cover (A).




5. Remove the console side cover (A).




6. Remove the console tray mat (A).




7. After loosening the console mounting screws and bolts, remove the floor console assembly (A).




8. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.