Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Blower Resistor

Inspection

1. Measure terminal-to-terminal resistance of the blower resistor.
2. If measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)

Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.(refer to BD group-crash pad)
3. Disconnect the connector and then remove the blower resistor (A).

4. Installation is the reverse order of removal.