Reset Procedure

Operation

1. General Function
A. Auto-learn takes place only once per Ignition cycle.
B. On successful completion, 4 road wheel sensor ID's are latched into memory for monitoring.
C. Until Auto-learn completes, previously learned sensors are monitored for under inflation / leak warnings.
2. General Conditions to Learn New Sensors:
A. Receiver must determine that it is confident that sensor is not temporary:
1) Uses vehicle speed.
2) Uses confidence reduction of previously learned sensors.
B. Typical time at driving continuously over 12.4 mph(20 kph) to learn a new sensor is up to 20 minutes.
3. General Conditions to Un-Learn a sensor that is removed:
A. It takes less than 20 minutes at 12.4 - 18.6 mph(20 - 30kph).
B. Confidence reduction is dependent on time which vehicle is driven at speed greater than or equal to 12.4 mph(20 kph).