Repair Procedures

Replacement

[200W]
1. Disconnect the battery negative terminal.
2. Remove the glove box housing.
3. Disconnect the DC/DC converter connector (A) and then remove the DC/DC converter (B).




4. Installation is reverse order of removal.

NOTE:
After disconnecting then reconnecting the battery negative cable, the ISG function dose not operates until the system is stabilized, about 4 hours.

[400W]
1. Disconnect the battery negative terminal.
2. Remove the rear seat.
3. Remove the luggage side trim.
4. Disconnect the DC/DC converter connector (A) and then remove the DC/DC converter (B).




5. Installation is reverse order of removal.

NOTE:
After disconnecting then reconnecting the battery negative cable, the ISG function dose not operates until the system is stabilized, about 4 hours.