Auxiliary Battery Tray

Auxiliary Battery Tray

Service Repair No - 76.10.31

Removal
1. Remove the battery cover.
^ Release the 2 mounting clips.





2. Disconnect the battery ground cable.
3. If installed, remove the auxiliary battery.
4. Remove the engine compartment upper heat shield.
^ Remove the screw.
^ Release the 2 mounting clips.





5. Remove the auxiliary battery compartment side wall.
^ Release the battery positive cable and grommet.
^ Release the 4 clips.





6. Remove the auxiliary battery tray.
^ Remove the 3 nuts.





Installation
1. To install, reverse the removal procedure.
Tighten the nuts to 12 Nm (9 ft. lbs.).