Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Fender Liner: Service and Repair



Fender Splash Shield

Service Repair No - 76.10.48


Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.

2. Remove the front wheel.
3. Remove the front LH fender splash shield.
^ Remove the 3 nuts.
^ Remove the 13 screws.
^ Disconnect the tire pressure monitoring system front antenna electrical connector.







4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the tire pressure monitoring system front antenna.
^ Release the 2 clips.

Installation

1. Install the tire pressure monitoring system front antenna.
2. Install the front LH fender splash shield.
^ Connect the tire pressure monitoring system front antenna electrical connector.
^ Tighten the screws.
^ Tighten the nuts.

3. Install the front wheel.
^ Tighten the wheel nuts to 140 Nm (103 ft. lbs.).