Climate Control Assembly

Climate Control Assembly

Service Repair No - 80.10.02

Removal

NOTE: On high line models the climate control ECU is an integral part of the climate control assembly.Using the Land Rover approved diagnostic system, calibrate a new climate control assembly.

1. Remove the RH floor console extension.
2. Remove the LH floor console extension.
^ Remove the screw.
^ Release the 2 clips.





3. Release the climate control assembly.
^ Release the 4 clips.





4. Remove the climate control assembly.
^ Disconnect the 5 electrical connectors.





Installation
1. Install the climate control assembly.
^ Connect the electrical connectors.
2. Attach the climate control assembly.
^ Secure the clips.
3. Install the LH floor console extension.
^ Secure the clips.
^ Tighten the screw.
4. Install the RH floor console extension.
5. Using the Land Rover approved diagnostic system, calibrate a new climate control assembly.