Fluid Filter - A/T: Service and Repair

Fluid Pan, Gasket and Filter

Service Repair No - 44.24.04

Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Drain the transmission.
3. Remove the fluid pan.
^ Position a container to collect the fluid spillage.
^ Remove the 21 Torx screws.
^ Remove and if necessary, discard the seal.
^ Discard the O-ring seal.





Installation

1. Install the fluid pan.
^ Clean the components.
^ Install the seal.
^ Install a new O-ring seal.
^ Tighten the Torx screws to 8 Nm (6 ft. lbs.).

2. Refill the transmission with fluid.