Rear Door Window Regulator: Service and Repair

Rear Door Window Regulator Motor

Removal

1. Remove the rear door window glass.
2. Remove the rear door window regulator and motor.
^ Disconnect the electrical connector.
^ Remove and discard the lower bolt.
^ Remove the 2 upper bolts.







Installation

1. Install the rear door window regulator and motor.
^ Remove the two clips from the rear door window regulator and motor.
^ Tighten the 2 upper bolts to 10 Nm (7 ft. lbs.).
^ Tighten the new bolt to 10 Nm (7 ft. lbs.).

2. Connect the rear door window glass regulator and motor electrical connector.
3. Install the rear door window glass.