Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Distance Sensor: Service and Repair



Speed Control Sensor

Removal
1. Disconnect the battery ground cable.
2. Remove the front bumper cover.
3. Remove the LH bumper support bracket.
^ Remove the 3 Torx screws.
^ Remove the screw.





4. Remove the speed control sensor.
^ Remove the 2 bolts.
^ Remove the nut.
^ Release and disconnect the electrical connector.





Installation
1. Install the speed control sensor.
^ Tighten the nuts and bolts to 10 Nm (7 ft. lbs.).
^ Connect and secure the electrical connector.

2. Install the bumper support bracket.
^ Tighten the screws.

3. Connect the battery ground cable.
4. Adjust the speed control sensor.
5. Install the front bumper cover.
6. Using T4, configure a new speed control sensor.