Rear
Brake CaliperService Repair No - 70.55.25
Removal
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the wheel and tire.
3. CAUTION: Make sure that new bolts are installed.
NOTE: Use an additional wrench to prevent the component from rotating.
4.
5. CAUTION: Make sure that new bolts are installed.
NOTE: Use an additional wrench to prevent the component from rotating.
6. CAUTION: Make sure that all openings are sealed. Use new blanking caps.
7. Remove the brake caliper housing.
Installation
1. WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Clean the brake caliper housing and anchor plate using brake cleaning fluid.
2. Install the brake caliper.
3. Connect the brake tube to the brake caliper.
Torque:
30 Nm
4. Install the brake caliper upper bolt.
Torque:
30 Nm
5. Install the two clips.
Install the brake pads.
6. CAUTION: Make sure that the brake hose is not twisted and is correctly located.
Install the brake caliper lower bolt.
Torque:
30 Nm
7. Install the wheel and tire.
8. Bleed the brake system.