G862187T4 : Check For Failure at Intermediate Connector C23T Pin 2

Pinpoint Tests

NOTE: Visually inspect for any of the following conditions and rectify any fault identified prior to carrying out any tests on the MOST Network.

^ Any sharp bends in the optical fibre harness (check for this before disturbing any module or connector).
^ Incorrect engagement of any optical connectors
^ Incorrect engagement of any electrical connectors
^ Damage to the optical fibre harness (chafing, abrasion, kinking, cuts, break, etc)
^ Incorrect assembly of the optical network
^ Unless otherwise stated, ensure vehicle ignition status is set to 'ON' when carrying out MOST Network tests.

G862187t4 : CHECK FOR FAILURE AT INTERMEDIATE CONNECTOR C23T PIN 2

1. Disconnect the MOST network intermediate connector C23T.

^ Is the bright red light visible at MOST intermediate connector C23T pin 2?

->Yes
GO to Pinpoint Test G862187t5.G862187T5 : Check For Failure at First Half of Most Network

->No
GO to Pinpoint Test G862187t6.G862187T6 : Check For Failure at Information and Entertainment Module