Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2008 >> LR2 (LF) L6-3.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Differential >> Control Unit >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Unit: Service and Repair





NOTE: This article contains updated information called out in TSB TECLTB00161.

Active On-Demand Coupling Module

Service Repair No - 51.30.03

Removal

NOTE: If replacing the Active on-demand coupling module the sensor and throttle valve must also be replaced.

WARNING: Make sure to support the vehicle with axle stands.

1. Raise the vehicle on a lift.
2. Disconnect the 2 electrical connectors.





CAUTION: Make sure that the area around the component is clean and free of foreign material.

3. Position a container to collect the fluid spillage.
Remove and discard the gasket.





4. Remove the throttle valve using grips or pliers.





5. Remove the sensor using grips or pliers.





Installation
1. Install the new gasket.
2. Install the new sensor.
3. Install the cupped washer to the sensor with the convex side against the sensor.





4. Install the new throttle valve.

CAUTION: Only use the specified material to lubricate the seals.

5. Lubricate and install a new O-ring seal.

NOTE: Lubricate the O-ring seal.

6. Install the active on-demand coupling module.
Torque: 6 Nm
7. Connect the 2 electrical connectors.
pro multis · About Operation CHARM