Power Transfer Unit

Power Transfer Unit - 3.2L

Removal

1. Raise the vehicle on a lift.
2. Remove the driveshaft.
3. Remove the catalytic converters.
4. Remove the RH halfshaft.

5.
Torque:
60 Nm

6. NOTE: This step requires the aid of another technician.

Torque:
60 Nm

7.
8.
Torque:
10 Nm

Installation

1. To install, reverse the removal procedure.

2. CAUTION: Make sure that the component is clean, free of foreign material and lubricant.

NOTE: Apply the required quantity of grease the correct specification.

For fluid specification, refer to the specification's.