Climate Control Assembly

Climate Control Assembly

Removal

NOTE:
On high line models the climate control ECU is an integral part of the climate control assembly. Using the Land Rover approved diagnostic system, calibrate a new climate control assembly.
1 Remove the RH floor console extension. For additional information, refer to Floor Console Extension Floor Console Extension




2 Remove the LH floor console extension.
- Remove the screw.
- Release the 2 clips.




3 Release the climate control assembly.
- Release the 4 clips.




4 Remove the climate control assembly.
- Disconnect the 5 electrical connectors.

Installation
1 Install the climate control assembly.
- Connect the electrical connectors.
2 Attach the climate control assembly.
- Secure the clips.
3 Install the LH floor console extension.
- Secure the clips.
- Tighten the screw.
4 Install the RH floor console extension. For additional information, refer to Floor Console Extension Floor Console Extension
5 Using the Land Rover approved diagnostic system, calibrate a new climate control assembly.