Tire Pressure Monitoring System Module

Tire Pressure Monitoring System Module

Removal





1 Remove the access panel from the loadspace RH trim panel.




2 Release the auxiliary junction box mounting bracket.
- Remove the 3 bolts.




3 Remove the tire pressure monitoring module.
- Disconnect the 2 electrical connectors.
- Remove the 2 nuts.

Installation
1 Install the tire pressure monitoring module.
- Tighten the nuts.
- Connect the electrical connectors.
2 Secure the auxiliary junction box mounting bracket.
- Tighten the bolts to 6 Nm (4 lb.ft).
3 Install the access panel.
4 Using WDS, initiate a new control module.