Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Yaw Rate Sensor: Service and Repair

Yaw Rate Sensor

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Specifications
2 Remove the floor console. For additional information, refer to Floor Console

3
CAUTION: Make sure the wiring harness is protected when cutting the carpet.
Remove the yaw rate sensor.
- Cut the carpet for access.
- Position the wiring harness aside.
- Disconnect the electrical connector.
- Remove the 2 bolts.

Installation
1 Install the yaw rate sensor.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect the electrical connector.
- Attach the wiring harness.
- Attach the carpet.
2 Install the floor console. For additional information, refer to Floor Console
3 If a new yaw rate sensor has been installed, interrogate the ABS system using T4.