Crankshaft

DIMENSIONS
Thrust Clearance
STD 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum 0.300 mm (0.0118 inch)

Thrust Washer Thickness
STD 2.440 - 2.490 mm (0.0961 - 0.0980 inch)
O/S 0.125 2.503 - 2.553 mm (0.0985 - 0.1005 inch)
O/S 0.250 2.565 - 2.615 mm (0.1010 - 0.1030 inch)

Main Journal Oil Clearance
STD 0.036 - 0.054 mm (0.0014 - 0.0021 inch)
U/S 0.25 0.035 - 0.075 mm (0.0014 - 0.0030 inch)
Maximum 0.10 mm (0.0039 inch)

Main Journal Diameter
STD 68.982 - 69.000 mm (2.7158 - 2.7165 inch)
U/S 0.25 68.745 - 68.755 mm (2.7065 - 2.7069 inch)

Main Bearing Center Wall Thickness
STD
Mark 2 2.492 - 2.495 mm (0.0981 - 0.0982 inch)
Mark 3 2.495 - 2.498 mm (0.0982 - 0.0983 inch)
Mark 4 2.498 - 2.501 mm (0.0983 - 0.0985 inch)
Mark 5 2.501 - 2.504 mm (0.0985 - 0.0986 inch)
Mark 6 2.504 - 2.507 mm (0.0986 - 0.0987 inch)

Crank Pin Diameter
STD 56.982 - 57.000 mm (2.2434 - 2.2441 inch)
U/S 0.25 56.745 - 56.755 mm (2.2341 - 2.2344 inch)

Circle Runout
Maximum 0.06 mm (0.0024 inch)

Main Journal Taper And Out-Of-Round
Maximum 0.02 mm (0.0008 inch)

Crank Pin Taper And Out-of-round
Maximum 0.02 mm (0.0008 inch)