Backup Lamp: Service and Repair
BACK-UP LAMP LENS & BODY LHREPLACEMENT
1. REMOVE BACK DOOR GARNISH CENTER
2. REMOVE BACK DOOR SIDE GARNISH RH
3. REMOVE BACK DOOR SIDE GARNISH LH
4. REMOVE TOOL BOX PANEL SUB-ASSY UPPER
5. REMOVE DOOR PULL HANDLE SUB-ASSY
6. REMOVE BACK DOOR TRIM BOARD
7. REMOVE BACK DOOR SERVICE HOLE COVER
8. REMOVE LICENSE REAR LAMP COVER
9. REMOVE BACK DOOR OUTSIDE GARNISH
a. Disconnect the connectors.
b. Remove the 4 nuts.
c. Release the 5 clips, and remove the back door outside garnish.
10. REMOVE BACK-UP LAMP LENS & BODY LH
a. Remove the back up lamp body gasket LH.
b. Remove the socket with the bulb.
c. Release the 2 claws and remove the back-up lamp lens & body LH.