Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Testing and Inspection

Ignition Coil Inspection:

- Disconnect ignition coil No. 1 electrical connector.
- Measure resistance across primary terminals.

Should be 0.30 - 0.60 ohms (at 14 - 104°F)

- Remove coil high tension wire.
- Measure resistance between high voltage terminal and indicated connector terminal.

Should be 9.0 - 15.0k ohms (at 14 - 104°F)

- Replace coil if results are not achieved.
- Repeat test on ignition coil No.2.