Ignition Timing: Adjustments
1. ADJUST IGNITION TIMING.
- Using SST 09843-18020, connect terminals TE1 and E1 of the DLC1.
- Using a timing light, check the ignition timing.
Ignition timing:10 ± 2° BTDC @ idle
(Transmission in neutral position)
- Loosen the nut, and adjust by turning the distributor.
Ignition timing: 10° BTDC @ idle
(Transmission in neutral position)
- Tighten the nut, and recheck the ignition timing.
Torque: 19 Nm (14 ft lb)
- Remove the SST 09843-18020 from the DLC1.
2. FURTHER CHECK IGNITION TIMING.
Ignition timing: 7 - 19° BTDC @ idle
(Transmission in neutral position)
HINT: The timing mark moves in a range between 7° and 19°.