Connecting Rod

DIMENSIONS
Clearance:
Oil:
Standard 0.032 - 0.050 mm (0.0013 - 0.0020 inch)
U/S 0.25 0.033 - 0.073 mm (0.0013 - 0.0029 inch)
Maximum 0.10 mm (0.0039 inch)
Piston Pin Oil:
Standard 0.004 - 0.012 mm (0.0002 - 0.0005 inch)
Maximum 0.05 mm (0.0020 inch)
Thrust:
STD 0.160 - 0.262 mm (0.0063 - 0.0103 inch)
Maximum 0.362 mm (0.0143 inch)

Diameter:
Bushing Inside 26.008 - 26.020 mm (1.0239 - 1.0244 inch)
Bolt Outside:
Standard 8.40 - 8.60 mm (0.3307 - 0.3386 inch)
Minimum 8.00 mm (0.3150 inch)
Piston Pin 26.000 - 26.012 mm (1.0236 - 1.0241 inch)

Rod:
Bend:
Maximum Per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Twist:
Maximum Per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)

Thickness:
Bearing Center Wall:
Standard:
Mark 2 1.744 - 1.747 mm (0.0687 - 0.0688 inch)
Mark 3 1.747 - 1.750 mm (0.0688 - 0.0689 inch)
Mark 4 1.750 - 1.753 mm (0.0689 - 0.0690 inch)
Mark 5 1.753 - 1.756 mm (0.0690 - 0.0691 inch)
Mark 6 1.756 - 1.759 mm (0.0691 - 0.0693 inch)

TIGHTENING SPECIFICATIONS
Rod Cap To Connecting Rod
1st Pass 48 Nm (35 ft. lbs.)
2nd Pass Turn Additional 90°