Clearing Trouble Codes

1. Confirm that the center differential is free.
2. Using SST, connect terminals Tc and E1 of the DLC1 and remove the short pin from DLC1.
SST 09843 - 18020
3. Turn the Ignition Switch ON.





4. Clear the DTC stored in Electronic Control Unit (ECU) by depressing the Brake Pedal 8 or more times within 3 seconds.
5. Check that the warning light shows the normal code.
6. Remove the SST from terminals Tc and E1 of the DLC1.
SST 09843 - 18020





7. Connect the short pin to the DLC1.

NOTE: Cancellation can also be done by removing the ECU-B fuse, but in this case, other memory systems will also be cancelled out.