Assembly

ASSEMBLE EXHAUST CAMSHAFT





1. Mount the hexagon wrench head portion of the camshaft in a vise.

CAUTION: Be careful not to damage the camshaft.





2. Install the following parts:
(a) Camshaft gear spring.
(b) Camshaft sub-gear.
(c) Wave washer.

NOTE: Align the pins on the gears with the spring ends.

3. Using snap ring pliers, install the snap ring.





4. Insert a service bolt (A) into the service hole of the camshaft sub-gear.
5. Using a screwdriver, align the holes of the camshaft main gear and sub-gear by turning camshaft sub-gear clockwise, and install a service bolt (B).

CAUTION: Be careful not to damage the camshaft.