Installation

1. Using Special Service Tool (SST) Water Pump Overhaul Tool Set # 09236 - 00101 (Bearing Stay # 09236 - 15010) or equivalents, push in a new oil seal.





NOTE: Different oil seals are used for the intake and exhaust.





2. Install the following parts:
(a) Valve.
(b) Spring seat.
(c) Valve spring.
(d) Spring retainer.





3. Using SST Valve Spring Compressor # 09202 - 70020 (Attachment # 09202 - 00010) or equivalents, compress the valve spring and place the 2 keepers around the valve stem.





4. Using a plastic-faced hammer, lightly tap the valve stem tip to ensure a proper fit.