Disassembly and Reassembly

DISASSEMBLY

1. REMOVE AIR INLET SERVO MOTOR
a. Disconnect the connector.
b. Remove the 2 screws and servo motor.
2. REMOVE LOWER COVER
a. Disconnect the control link.
b. Remove the 2 screws.
c. Release the 2 claws and remove the lower cover.

3. REMOVE BLOWER MOTOR
a. Disconnect the connector.
b. Remove the 3 screws and blower motor.

REASSEMBLY
Reassembly is in the reverse order of disassembly.