Removal

NOTICE:
^ It the wiring connector of the SRS is disconnected with the ignition switch at ON or ACC, DTCs will be recorded.

Removal:

1. DISCONNECT AIRBAG CONNECTOR
a. Remove the glove compartment door.
b. Remove the airbag connector from the airbag bracket.

NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

c. Disconnect the airbag connector.

2. REMOVE INSTRUMENT PANEL


3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

Remove Instrument Panel:

a. Remove the 4 bolts and 2 nuts, and remove front passenger airbag assembly.

Remove Front Passenger Airbag Assembly:

b. Pry up the 6 clips shown in the illustration and remove the airbag door.

CAUTION:
^ Do not store the front passenger airbag assembly with the airbag deployment direction facing down.
^ Never disassemble the front passenger airbag assembly.