Speed Sensor, Rear

Rear Speed Sensor Components:

REAR SPEED SENSOR

REMOVAL

NOTE: When replacing the sensor or sensor harness, replace the sensor and sensor harness together as a set.

Disconnect Speed Sensor Connector:

1. Disconnect the Speed Sensor connector.
(a) Disconnect the speed sensor connector.
(b) Remove the 3 clamp bolts and 2 clips holding the sensor wire harness from the suspension arm and frame.
2. Remove Speed Sensor.
Remove the installation bolt and speed sensor from the axle end.
Torque: 18 Nm (13 ft. lbs.)

INSTALLATION
Installation is in the reverse order of removal.

NOTE: After installation, check Speed Sensor signal.