Front

Front Suspension / Coil Spring, Shock Absorber, Lateral Control Rod, Stabilizer Bar:

INSPECTION
1. Inspect shock absorber. Compress and extend the shock absorber rod and check that there is abnormal resistance or unusual operation sounds. If there is any abnormality, replace the shock absorber with a new one.

NOTICE:When discarding the shock absorber, use the following procedure.





2. Discard shock absorber. Before discarding the shock absorber, drill a hole 2 - 3 mm (0.079 - 0.118 inch) in diameter at the location shown in the illustration to release the gas inside.

NOTICE:
^ When drilling, chips may fly out, work carefully.
^ The gas is colorless, odorless and non-poisonous.