C1764

CIRCUIT DESCRIPTION





DETECTING CONDITIONS

Fail safe function:
- If the DTC C1763/63 detected, the height control is prohibited after the following controls have been performed.
In case that the height of the defect wheel is -10 mm to +10 mm against the other wheels, adjust the normal wheels to the standard height.
In case that the height of the defect wheel is more than 10 mm higher than the other wheels, adjust the normal wheels 10 mm higher.
In case that the height of the defect wheel is less than 10 mm lower than the other wheels, adjust the normal wheels 10 mm lower.
- If the DTC C1764/64 detected, the ECU prohibits the control of accumulating and releasing of the pressure of the height control accumulator.





WIRING DIAGRAM

Step 1:

Step 2:

Step 3:

INSPECTION PROCEDURE