Rear

REMOVAL
1. REMOVE REAR WHEELS

Torque: 131 Nm (1,340 kgf-cm, 97 ft. lbs.)

2. SUPPORT REAR AXLE HOUSING WITH JACK





3. DISCONNECT LH AND RH STABILIZER BAR BRACKET
Remove the 4 bolts and disconnect the LH and RH stabilizer bar brackets.

Torque: 18 Nm (185 kgf-cm, 13 ft. lbs.)





4. REMOVE STABILIZER BAR
a. Remove the 4 bolts and stabilizer bar with bushings and brackets.

Torque: 18 Nm (185 kgf-cm, 13 ft. lbs.)

b. Remove the 2 brackets and 2 bushings from the stabilizer bar.
5. REMOVE BOTH STABILIZER BAR LINKS FROM STABILIZER BAR
a. Remove the 2 nuts, 6 retainers, 4 cushions and disconnect the stabilizer bar link from the bracket.

Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)

HINT: At the time of installation, replace the used 2 nuts with new ones.

b. Remove the 2 nuts, bolts and stabilizer bar links.

Torque: 26 Nm (270 kgf-cm, 19 ft. lbs.)

c. Remove the 2 collars and 2 cushions.

INSTALLATION
Installation is in the reverse order of removal.