Parking Pawl: Service and Repair

ON-VEHICLE REPAIR
1. REMOVE VALVE BODY.
Refer to Valve Body; Service and Repair.





2. REMOVE PARKING LOCK PAWL BRACKET





3. REMOVE SPRING FROM PARKING LOCK PAWL SHAFT
4. REMOVE PARKING LOCK PAW L AND SHAFT
5. INSTALL PARKING LOCK PAWL AND SHAFT
6. INSTALL SPRING TO PARKING LOCK PAWL SHAFT





7. INSTALL PARKING LOCK PAWL BRACKET

HINT:
^ Push the lock rod fully forward.
^ Check that the parking lock pawl operates smoothly

Torque: 7.4 Nm (75 kgf cm, 65 inch lbs.)
8. INSTALL VALVE BODY.
Refer to Valve Body; Service and Repair.