Speed Sensor, Rear

REMOVAL
REMOVE SPEED SENSOR





a) Disconnect the speed sensor connector.
b) Remove the clamp bolt from the upper control bracket.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
c) Remove the 6 resin clips, holding the sensor wire harness from the frame, upper control arm and axle housing.





d) Remove the mounting bolt and speed sensor.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.
AFTER INSTALLATION, CHECK SPEED SENSOR SIGNAL