Rear Heater Relay

REAR HEATER RELAY

INSPECTION

1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE COWL SIDE TRIM RH
3. REMOVE REAR HEATER RELAY




a. Remove the 2 No.3 junction block set nuts.
b. Loosen the bolt and disconnect the connector.
c. Pull the junction block.




d. Remove the rear heater relay.







4. INSPECT REAR HEATER RELAY CONTINUITY
If continuity is not as specified, replace the relay.

5. INSTALL RELAY
6. INSTALL 3 NO.2 JUNCTION BLOCK SET NUTS
7. INSTALL COWL SIDE TRIM RH
8. INSTALL FRONT DOOR SCUFF PLATE LH