Transaxle Side Seals, A/T

ON-VEHICLE REPAIR
1. DRAIN ATF
2. U140F:
DRAIN TRANSFER OIL
3. REMOVE LH AND RH DRIVE SHAFT





4. REMOVE LH AND RH SIDE OIL SEAL
Using SST, drive out both the side oil seals.
SST 09308 00010





5. INSTALL LH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal until its surface is flush until the case surface.
SST 0935-32014 (09351-32111, 09351-32130)
Oil seal drive in depth: 0 ± 0.5 mm (0 ± 0.020 inch)
(b) Coat the oil seal lip with MP grease.





6. U140E:
INSTALL RH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09223 00010
Oil seal drive in depth: 0 ± 0.5 mm (0 ± 0.020 inch)
(b) Coat the oil seal lip with MP grease.





7. U140F:
INSTALL RH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09223-406011
Oil seal drive In depth: 1 ± 0.3 mm (0.039 ± 0.012 inch)
(b) Coat the oil seal lip with MP grease.
8. INSTALL LH AND RH DRIVE SHAFT
9. U140F:
FILL TRANSFER OIL
10. FILL ATF AND CHECK ATF LEVEL