Tire Pressure Module: Service and Repair

REPLACEMENT

HINT:
COMPONENTS: See Diagrams; Exploded Views.

1. SHIP MODE SETTING
2. SEPARATE BATTERY NEGATIVE TERMINAL
a) Disconnect the negative terminal.
3. REMOVE CONSOLE UPPER PANEL GARNISH REAR [58832A/98-82]
4. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER [58804A/98-82]
5. REMOVE AIR CONDITIONER CONTROL ASSEMBLY
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER [55406F/98-82]
7. SHIP MODE CONFIRMATION





8. REMOVE TIRE PRESSURE MONITOR RECEIVER ASSEMBLY [89760C/98-142]
a) Disconnect the 2 connectors.
b) Remove the 2 bolts and receiver assembly.





9. INSTALL TIRE PRESSURE MONITOR RECEIVER ASSEMBLY [89760C/98-142]
a) Install the receiver assembly with the 2 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
b) Connect the 2 connectors.
10. INSPECT TIRE PRESSURE WARNING SYSTEM