Transmission Speed Sensor: Service and Repair

REPLACEMENT





1. REMOVE SPEED SENSOR (NC0 SENSOR)
a. Disconnect the connector.
b. Remove the bolt and speed sensor.





2. REMOVE SPEED SENSOR (SP2 SENSOR)
a. Disconnect the connector.
b. Remove the bolt and speed sensor.





3. INSTALL SPEED SENSOR (SP2 SENSOR)
a. Coat O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the connector.





4. INSTALL SPEED SENSOR (NC0 SENSOR)
a. Coat O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the connector.