Diagnostic Mode
Diagnostic ModeHINT: If the system cannot enter the diagnosis mode, inspect all AVC-LAN communication signals and repair or replace problem parts.
1. STARTING DIAGNOSTIC MODE
a. Turn the ignition switch to the ACC position.
b. Turn off the audio system.
c. While pressing the preset switches "1" and "6" at the same time, press the "DISC" 3 times.
HINT:
- When the system enters the diagnostic mode, a beep sound is emitted 3 times and all the elements come on during the SW check mode.
- It takes approximately 40 seconds to complete the check.
- Turn all the elements in the LCD on.
- When pressing the switch, confirm a beep sound is emitted.
- Press the "SEEK TRACK UP" switch to enter the "System Check Screen".
2. FINISHING DIAGNOSTIC MODE
a. Press the "DISC" for 2 seconds or more, or turn the ignition switch off.