Pinout Values and Diagnostic Parameters

TERMINALS OF ECU




1. CHECK OUTER MIRROR CONTROL ECU LH
a. Disconnect the R26 connector.







b. Measure the voltage and resistance according to the value(s) in the table.

If the result is not as specified, there may be a malfunction on the wire harness side.

c. Reconnect the R26 connector.







d. Measure the voltage according to the value(s) in the table.




2. CHECK OUTER MIRROR CONTROL ECU RH
a. Disconnect the R27 connector.







b. Measure the voltage and resistance according to the value(s) in the table.

If the result is not as specified, there may be a malfunction on the wire harness side.

c. Reconnect the R27 connector.




d. Measure the voltage according to the value(s) in the table.