Disassembly and Reassembly

DISASSEMBLY

REMOVE COOLER DRYER




a. Using hexagon wrench 14 mm (0.55 in.), remove the cap and filter from the modulator.




b. Remove the O-ring from the cap.




c. Using needle nose pliers, remove the cooler dryer.

REASSEMBLY

INSTALL COOLER DRYER




a. Using needle nose pliers, install the cooler dryer.




b. Install new O-ring to the cap.
c. Sufficiently apply compressor oil to the fitting surfaces of the O-ring and the cap.

Compressor oil: ND-OIL 8 or equivalent




d. Using hexagon wrench 14 mm (0.55 in.), install the cap to the cooler condenser assembly.

Torque: 2.9 N.m (30 kgf.cm, 25 in.lbf)