Clock: Testing and Inspection

ON-VEHICLE INSPECTION

1. INSPECT INTEGRATION CONTROL & PANEL ASSEMBLY




a. Disconnect the C4 connector.




b. Measure the voltage between the terminals according to the value(s) in the table.




c. Measure the resistance between the terminals according to the value(s) in the table.

HINT: If the value is not as specified, replace the integration control & panel assembly.

2. INSPECT MULTI-DISPLAY




a. Disconnect the M5 connector.




b. Measure the voltage between the terminals according to the value(s) in the table.




c. Measure the resistance between the terminals according to the value(s) in the table.

HINT: If the value is not as specified, replace the multidisplay.