Variable Induction Control Valve: Service and Repair

Intake Air Control Valve:

REMOVAL

1. DRAIN ENGINE COOLANT
2. REMOVE FR WIPER ARM LH
3. REMOVE FR WIPER ARM RH
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
7. REMOVE WINDSHIELD WIPER LINK ASSEMBLY
8. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER
9. REMOVE V-BANK COVER SUB-ASSEMBLY
10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
11. REMOVE EMISSION CONTROL VALVE SET
12. REMOVE INTAKE AIR SURGE TANK
13. REMOVE INTAKE AIR CONTROL VALVE ASSEMBLY NO.2

a. Remove the 3 bolts and nut.
b. Rotate the lever to the closed position as shown in the illustration and pull out the intake air control valve No.2.
c. Remove the gasket from the intake air surge tank.

INSTALLATION

1. INSTALL INTAKE AIR CONTROL VALVE ASSEMBLY NO.2

a. Install a new gasket to the intake air surge tank.
b. Install the intake air control valve No.2 with the 3 bolts and nut.

Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

2. INSTALL INTAKE AIR SURGE TANK
3. INSTALL EMISSION CONTROL VALVE SET
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
5. CHECK CONNECTION OF VACUUM HOSE
6. ADD ENGINE COOLANT
7. CHECK FOR ENGINE COOLANT LEAKS
8. INSTALL V-BANK COVER SUB-ASSEMBLY
9. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER
10. INSTALL WINDSHIELD WIPER LINK ASSEMBLY
11. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
12. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
13. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
14. INSTALL FR WIPER ARM RH
15. INSTALL FR WIPER ARM LH