Transmission Speed Sensor: Service and Repair
SPEED SENSORComponents:
REMOVAL
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSEMBLY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER INLET NO.2
5. REMOVE AIR CLEANER BRACKET
6. REMOVE AIR CLEANER INLET NO.1
7. REMOVE SPEED SENSOR (NT SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and speed sensor.
8. REMOVE SPEED SENSOR (NC SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and speed sensor.
INSPECTION
Resistance:
1. INSPECT SPEED SENSOR (NT SENSOR)
a. Disconnect the speed sensor connector from the transaxle.
b. Measure the resistance according to the value(s) in the table.
Resistance:
2. INSPECT SPEED SENSOR (NC SENSOR)
a. Disconnect the speed sensor connector from the transaxle.
b. Measure the resistance according to the value(s) in the table.
INSTALLATION
1. INSTALL SPEED SENSOR (NC SENSOR)
a. Coat the O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure to install the same manufacturer's sensor.
c. Connect the speed sensor connector.
2. INSTALL SPEED SENSOR (NT SENSOR)
a. Coat the O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure to install the same manufacturer's sensor.
c. Connect the speed sensor connector.
3. INSTALL AIR CLEANER INLET NO.1
4. INSTALL AIR CLEANER BRACKET
5. INSTALL AIR CLEANER INLET NO.2
6. INSTALL AIR CLEANER HOSE NO.1
7. INSTALL AIR CLEANER ASSEMBLY
8. INSTALL BATTERY
9. PERFORM INITIALIZATION
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.