Tail Lamp: Testing and Inspection

ON-VEHICLE INSPECTION

1. INSPECT REAR OUTER COMBINATION LIGHT ASSEMBLY




a. Disconnect the connector from the rear outer combination light.




b. Measure the voltage according to the value(s) in the table.

If the result is not as specified, there is a malfunction on the wire harness side.

2. INSPECT REAR INNER COMBINATION LIGHT ASSEMBLY




a. Disconnect the connector from the rear inner combination light.




b. Measure the voltage according to the value(s) in the table.

If the result is not as specified, there is a malfunction on the wire harness side.